Technical Data
Reinforced steel prefabricated bridges
The standard bridges are available in lengths of 8.00 m; 9.00 m; 10.00 m; 12.00 m; 14.00 m; 16.00 m; 18.00 m and 20.00 m – all 3.00 m wide.
| underground scale bridge length [m] | Scale bridge | Length [m] | Width [m] | Height[m] | Weight [t] |
| 8,00 | 50 | 8,00 | 3,00 | 0,95 | 14,00 |
| 9,00 | 50 | 9,00 | 3,00 | 0,95 | 15,70 |
| 10,00 | 60 | 10,00 | 3,00 | 0,95 | 19,50 |
| 12,00 | 60 | 12,00 | 3,00 | 0,95 | 26,10 |
| 14,00 | 60 | 14,00 | 3,00 | 0,95 | 30,70 |
| 16,00 | 60 | 16,00 | 3,00 | 0,95 | 35,20 |
| 18,00 | 60 | 18,00 | 3,00 | 0,95 | 42,00 |
| 20,00 | 60 | 20,00 | 3,00 | 0,95 | 55,20 |
- For all lengths, only 4 load cells are needed.
- The bridges are provided with 2 accesses opening each with round covers for maintenance and cleaning.
- The bridges may be passed over from all sides.
- For wiring, DN 40 ductworks are provided under the bridge reflector.
- The edge protection profile 60/60/6 from ST 37 are provided at both ends as well as 0.75 m along the longitudinal side.
- There are bumper bags with M 20 screws and washers for these are built into the edge protection profile
- 4 transport anchors are provided to provide a levy in the foundation part.
- The bridge have structured surfaces to offer non-slip security.
The Advantages of this System:
- Only 4 load cells needed
- Easy access to load cells
- High flexibility through being able to be relocated
- Non-slip bridge surfaces
- Easy cleaning and maintenance
- May be delivered with protective panelling
