Technical Data

Combination scales

The combination scales consist of a foundation (one or more parts), and bridges. The standard bridge is available in lengths 6.00 m to 10.00 m. The standard foundation cavity can be created as a one piece model of up to 14.00 m and as a two piece model in length over 14.00 m.

• For railroad and road vehicles.
• Sized and designed according to the standard of the Technical Report 101, LM 101 and DIN 8119.
• 8 load cells are needed for the two-piece bridge and 4 load cells for the one-piece bridge.
• The bridges are provided with one access opening each with Class D round covers for maintenance and cleaning.
• The combination scales can be passed over from any direction.
• For wiring, DN 40 ductworks are provided under the bridge reflector.
• The edge protection profile 60/60/6 from ST 37 are provided at both ends as well as 0.75 m along the longitudinal side.
• There are bumper bags with M 20 screws and washers for these are built into the edge protection profile.
• Bearing plates provided for each load cell.
• Non-slip bridge surface.
• The bridge and cavity parts are constructed “overhead” in order to provide an optimal visual look of exposed concrete.
• For draining and for wiring 2 pipes each DN 100 are provided.
• Delivery of high value quality prefabricated concrete parts in Concrete Quality C 45/55.
• Combination scales may be provided for all common track widths and profiles.
• Connections for lightning protection equipment are provided.

Within a few hours, the railroad scales can be mounted on foundations constructed according to the site excavation plans.